MonsterSlayer.com

Storage Page

Coming Soon! Finally, low cost professional grade micro oxygen/fuel torch system.
Low Pressure, refillable cartridges are UPS approved!
Get ready to hard solder those jump rings!

GRINDING & CUTTING

J B PRO-GRINDER:    ~ Does not include padded end disc shown~
Without Diamond Wheels or Expandable Sanding Drum. Wheels sold separately below.
This great 6" grinder is thick cast aluminum. It's 3/4" shaft is drilled and tapped for 1/4-20 spin stations.
Right side accepts a 6" X 2-1/2" expandable sanding wheel. Features brass valves with copper tubing
water system you can hook up to home water tap, submersible pump or over head gravity tank.
A motor may be mounted to the center pulleys' V-belt from either behind or below.

LP-PRO-GRNDR  -  $395.00 Each  -  Quantity:      Out of Stock

Recommended motor: 1/3 HP Dayton -USA 1725 RPM 110v. Low Speed Motor.

BF-MOT-113S - $139.00 Each - Quantity:

HEAVY DUTY 3 Lb. ROTARY TUMBLER - 110 v.
Grobet brand. This sturdy, full 3 lb. capacity tumbler features a heavy gauge
steel base, watertight molded rubber barrel and thermally protected motor.
Stock number does not exist: "TU-ROT-3"

4 Inch
TINY TRIM Diamond Saw
For a Four Inch Blade - 1/2" Hole size.
Thick Cast Aluminum Base and Table.
This is the Professional Inlayer's choice!
As shown complete with a switch cord.
Reliable DAYTON 1/5 HP 3000 RPM motor.
Saw blade NOT included.

LP-TNY-TRIM - $225.00 Each - Quantity: Out of Stock

P.E.P.E. TOOL    Made in Europe.
CAD/CAM machined rolling mills.
4:1 gear reduction.

130 mm COMBO ROLLING MILL
Square, Half-Round & Flat
Discounted older version. (shown on left)

EQ-ROM-W130  -  $495.00 Each  -  Quantity:      Out of Stock

90 mm FLAT ROLLING MILL
Newest version. (not shown)

EQ-ROM-F90  -  $448.50 Each  -  Quantity:      Out of Stock

SATELLITE BUFFING MACHINES

* The polishing motors listed below have pigtail wire connections for our Satellite Dust Collectors.
To use these motors without a dust collector you will need to supply and install your own switch and wiring, or you can purchase one of these switch cords ...
SWITCH CORD for 110V. Motor - 8 Foot - 18 Ga. 3 Cord.

MT-CRD-SWICH - $30.00 Each - Quantity: Out of Stock

ECONO MODEL DUST COLLECTOR - NO MOTOR

BF-SAT-ECONO-FRAME - $280.00 Each - Quantity:

* 1/3 HP Baldor - USA 3450 RPM 110 volt Motor w/ Tapered Spindles

BF-MOT-213 - $129.00 Each - Quantity:

OR
* 1/2 HP Baldor - USA 3450 RPM 110 volt Motor w/ Tapered Spindles

BF-MOT-212 - $159.00 Each - Quantity: Out of Stock

OR
* 1/2 HP Imported 3450 RPM 110 volt Arbor Motor w/ SPINDLES

BF-MOT-IMP - $85.00 Each - Quantity:

PROFESSIONAL MODEL DUST COLLECTOR - NO MOTOR

BF-SAT-PRO-FRAME - $350.00 Each - Quantity:

* 1/3 HP Baldor - USA 3450 RPM 110v. Motor w/ Tapered Spindles

BF-MOT-213 - $129.00 Each - Quantity:

OR
* 1/2 HP Baldor - USA 3450 RPM 110v. Motor w/ Tapered Spindles

BF-MOT-212 - $159.00 Each - Quantity: Out of Stock

OR
* 1/2 HP Imported 3450 RPM 110v. Arbor Motor w/ SPINDLES

BF-MOT-IMP - $85.00 Each - Quantity:

SINGLE SIDE PROFESSIONAL MODEL DUST COLLECTOR- NO MOTOR

BF-SAT-SINGLE-FRAME - $245.00 Each - Quantity: Out of Stock

* 1/3 HP Dayton -USA 3450 RPM 110v. Motor w/ Tapered Spindle

BF-MOT-113 - $139.00 Each - Quantity:

OR
* 1/3 HP Dayton -USA 1725 RPM 110v. Low Speed Motor w/ Tapered Spindle

BF-MOT-113S - $139.00 Each - Quantity:

Forming Blocks

PEER® LITE MAGNIFIER with 3 LENSES

Focal Length	Power		Focal Length	Power		Focal Length	Power
14"	1-3/4X		9"	2-1/8X		6"	2-3/4X

Light-as-air construction makes this comfortable magnifier perfect for long wear. Wide, clear lens plates permit a large amount of light to reach eyes. Tilts out of the way when not in use, and can be worn over eyeglasses. Adjusts to fit most head sizes with easy-to-use hook and loop fasteners. Lenses are treated with a scratch resistant coating. Headband comes with 3 easily interchangeable lenses.

EQ-MAG-LITE - $48.50 Each - Quantity: