All our Nickel sheet and wire is supplied Dead Soft temper.
Nickel Silver (# 752) also known as "German Silver" is
an alloy consisting of
65% copper, 18% nickel & 17% zinc.
It contains NO SILVER.
Sheet stock is available in full 6" X 36" sheets or 6" X 18" half
You may specify additional cuts to your sheet purchase
Base Metal Sheet Cutting Charges
10 cents per cut for each 1/2" and larger piece or individual cut.
15 cents for each additional 1/4" to under 1/2" for each
20 cents for each for any additional cut smaller than 1/4".
25 cents for any 16 and 18 gauge sheet cuts.
We can not cut sheets length wise
beyond seven inches.
A trip to your local heating and cooling contractor is advised if you need
longer, lengthwise strip cuts as their sheet metal shears have that capacity.
Half Sheets are much easier to ship and with less damage due to mishandling by
If you can use half sheets order by the full
sheet to receive the best price and ask that they be cut in half for shipping.
Example: Order two sheets of 20 gauge nickel sheet and say you would like them
cut in half.
That will bring you four pieces that are 6" X 18"
All wire lengths are approximate. There are no further discounts on this base
Please e-mail special cutting requests to: firstname.lastname@example.org
for a complete list of wire specifications.
Now Introducing Aluminum Sheet